AP Racing by Essex Competition Brake Kit (Rear CP8350/325mm)- C6 Corvette

Description

Complete rear AP Racing by Essex Standard Competition Brake Kit for C6 Corvette

• Features AP Racing CP8350 four piston calipers (now with black AP Racing logos)

• 325x32mm, 70 vane AP Racing disc

• Clears OEM C6 Z06 rear 18″ wheels

• Eliminates factory parking brake

• Every component designed to resist the heat of extended track sessions

• Pistons sized properly to allow for seamless integration with OEM master cylinder and ABS system

• Designed to work with any of our front C6 Corvette BBK’s

This is a budget friendly kit designed for performance street & basic track day cars.

Our CP8350 Competition Brake Kit offers our customers the following advantages over the OEM brake system:

• Weighs roughly the same as the OEM rear brakes, despite offering considerably larger disc and pad

• AP Racing calipers are the stiffest, lightest, and most technologically advanced calipers available at any price

• CP8350 calipers use a 20mm thick, commonly available brake pad shape

• Stainless steel pistons keep heat out of the brake fluid and provide an ultra-firm pedal

• Mitigation of pad knockback via anti-knockback springs behind the caliper pistons

• Anodized caliper finish that is resistant to wear and deterioration at elevated temperatures

• Stainless steel caliper hardware for a long caliper service life under frequent pad change conditions

• High temperature, low drag seals that will hold up to track temps= less rebuilding and longer service life

• No dust boots to burn up

• Simple pad change with one bolt, no caliper removal required

• Lifetime professional caliper rebuilding support by Essex (at a fee)- pull off your calipers, send them to us, we clean, inspect, and rebuild them

• Available disc burnishing service ensures that your kit arrives ready to be installed and driven hard immediately

• Championship winning, 70 vane, fully floating, AP Racing J Hook racing discs with 10 attachment points to hat

• Anti-knockback/anti-rattle disc attachment hardware

• Replacement iron disc rings available at an extremely competitive replacement price

• Disc metallurgy specifically designed to handle the temps typically seen on track offer a long service life

• Highest quality, Spiegler stainless steel brake line with clear sheath that reduces compliance over OEM rubber design

Standard kit comes with no brake pads or select a Ferodo pad option.  Call for help & recommendations on proper pad compound selection for your specific car & intended use.

Optional Pad Tension Kit available to reduce pad rattle.